Original Tyvek tape - suited for emergency repairs on TPU packrafts.
 
75mm wide
 
Sold in multiples of 200mm lengths.
 
To use for pin hole or small puncture:
 
Locate damage / leak.  
Place damaged area on a flat firm surface or where possible inflate the raft so hull. is  barely firm.
Dry area well.
Clean with alcohol wipe / injection swab.
Allow to dry.
Cut tape to approx 30mm wider than hole.
Round edges to prevent peeling.
Stick carefully over avoiding creases.
Rub well to heat the patch.
Allow to bond for 15 mins.
Slowly inflate raft to full pressure.
Allow to stand for 5 mins, as long as the tape doesn't lift or bubble your good.
 
REMEMBER TO REMOVE ONCE HOME OR YOU'LL HAVE A TYVEK BRANDED RAFT!
 
Make permanent repairs with Tear Aid Type A for TPU.